Visor Holder, 10ft Direct Power Cord, Power Adaptor
|
|
This Radar Detector Visor Holder is combined with a 10 foot long direct wire power cord and a cigarette power adaptor. Most Remote radar detectors are designed to hook into the vehicle fuse box, but if you want a simpler electrical installation, use the direct wire, cigarette adaptor. This package is for people who do not want to connect the Direct Wire Power Cord to the fuse box, and prefer to connect power to the dash Cigarette Power Jack. It takes about 3 minutes to cut the 12V wire tip and Ground tip from the direct wire power cord, insert the red lead into the red screw post, insert the black ground lead into the black screw post of the cigarette adaptor and tighten both red and black screw posts down. Plug the cigarett adaptor into the cigarette power adaptor in your dash, and you are all set.
Hide the Bel STi-R, Escort 9500ci, Valentine1, Beltronics STi Driver, Escort 9500ix or the Bel GX65 radar detectors in the left or right pocket of the Radar Detector visor Holder.
If you desire 360 degree radar detection with hidden components, this package will hide two remote radar detectors in this special visor holder package. One radar remote is hidden in the left visor pocket, facing to the front out the top of the front windshield; while the second radar remote sits in the right visor pocket, peering out the back windshield for 360 radar detection. Cables are hidden, tucked into the windshield trim around the windshield and plugged into the radar interface under the dash. Clean and neat. Absolutely best detection performance for police speed traps to the front and rear of your vehicle. Three times the radar performance than when installing down in the grille and under the rear bumper.
Most remote radar modules are installed down in the front grille for invisibility. But when installing a remote radar down in the grille, the radar detector is too close to the road surface, significantly reducing radar detection sensitivity and increasing false alerts. It also costs more money to install a radar module in the grille. So, why should you install down in the grille and add more installation cost? Hide the radar module on the passenger visor! Keep your insurance papers in a visor pocket within easy reach. Nobody can see your radar detector hiding up on the passenger visor. This gray RDVH has wider elastic straps on the back and each strap is double stitched. If you purchased a similar radar detectort visor holder from another company with narrow, single stitch lines on the elastic strap, try this new RDVH for quality and well thought out design.
By moving the remote radar detector from the grille upto the windshield visor, you reduce heat damage from the radiator and double your radar detector performance. Likewise, by moving your windshield radar detector out of the hot 160 degree windshield, your portable radar detector can also be hidden on the passenger visor hiding it from view.
This visor holder is the perfect solution to protect your remote radar detector from grille heat damage; extends the radar detector life; keeps it out of sight from people walking by or driving by.
